Lower fees, local skills

Reduction in TAFE fees to benefit local students

A significant reduction in fees will make training more affordable for students enrolling in selected South Regional TAFE courses.

From 1 January 2020 to 31 December 2025, the course fee rate per hour for these qualifications will be reduced by 50 per cent. The maximum annual fee students will pay is capped at $400 for eligible concession students and youth, and at $1,200 for non-concession students for each course of study.

The fee reductions are a result of the Lower fees, local skills program and is aligned with priority industry areas to make vocational education and training more affordable. The two-year initiative aims to stimulate training in job growth areas and support important sectors of the State’s economy including aged and disability care, METRONET, defence, hospitality and tourism. This program is funded by JobTrainer – a joint initiative of the Western Australian and Australian Governments.

The following courses on the Lower fees, local skills list are delivered through South Regional TAFE.

Check our FAQs at the bottom of the Skills Ready web page for details and to see if you are eligible.

For more information on the ‘Lower fees, local skills’ program, visit jobsandskills.wa.gov.au/lowerfees (opens in a new tab)

^ You will pay half price for the course fees on the Lower fees, local skills qualifications, however other fees may apply such as for resources that are specifically needed for your course.
National ID: CHC43015
State ID: AWM9
Industry Education and Community Services
Half price^

Certificate IV in Ageing Support

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace
Workshops

Sub study areas:

Aged Care

This qualification reflects the role of support workers who complete specialised tasks and functions in aged services; either in residential, home or community based environments.

Workers will take responsibility for their own outputs within defined organisation guidelines and maintain quality service delivery through the development, facilitation and review of individualised service planning and delivery. Workers may be required to demonstrate leadership and have limited responsibility for the organisation and the quantity and quality of outputs of others within limited parameters.

To achieve this qualification, the candidate must have completed at least 120 hours of work as detailed in the Assessment Requirements of the units of competency.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: AUR30416
State ID: BAG3
Industry Automotive
Half price^

Certificate III in Agricultural Mechanical Technology

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Heavy Automotive Plant

This qualification would suit those working in or seeking work in agricultural machinery distribution, agricultural field work and agricultural farm work.

This apprenticeship program will enable you to gain the skills and knowledge needed to work on agricultural machinery and equipment and covers mechanical, electrical and hydraulic operations and braking systems.

The units in Apprenticeship are customised according to the individual Training Agreement that is negotiated with the employer and may vary (within the Qualification rules) in each case.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: AHC20116
State ID: BCZ7
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate II in Agriculture

Delivered at:

Study modes:

Traineeship

Sub study areas:

Agriculture

Open the gate to a career in Agriculture. If you are interested in gaining hands-on agricultural training, this program is designed for you. Our Certificate II in Agriculture provides a general introduction to agriculture skills and techniques. This qualification is suitable for an Australian Apprenticeship.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: AHC30116
State ID: BCW6
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate III in Agriculture

Study modes:

Traineeship
Workplace

Sub study areas:

Agriculture

This qualification provides a general vocational outcome in agriculture. The qualification enables individuals to select a livestock production, horticulture or livestock context as a job focus or, in the case of mixed farming enterprises, both horticulture and livestock.
Individuals with this qualification perform tasks in a variety of contexts, which involve some judgement in selecting equipment and services.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: AHC40116
State ID: BDF2
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate IV in Agriculture

Delivered at:

Study modes:

Sub study areas:

Agriculture

This qualification allows individuals to develop post-trade skills and knowledge to become specialists within the agriculture industry. It is designed to meet the needs of supervisors or team leaders in the agriculture industry.

Individuals with this qualification will take responsibility for their own work and for the quality of the work of others within known parameters. They provide and communicate solutions to a range of predictable and sometimes unpredictable problems. Job roles vary across different industry sectors and include Farm team leader or Farm supervisor.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: HLT33015
State ID: AWK5
Industry Health, Beauty and Fitness
Half price^

Certificate III in Allied Health Assistance

Delivered at:

Study modes:

Flexible
Traineeship

Sub study areas:

Allied Health

This qualification will provide you with the practical skills and knowledge to assist allied health staff (physiotherapists, occupational therapists and speech pathologists) by helping implement the patients rehabilitation or maintenance therapy programmes, and in preparing written and verbal reports on their progress.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: HLT43015
State ID: AWN3
Industry Health, Beauty and Fitness
Half price^

Certificate IV in Allied Health Assistance

Delivered at:

Study modes:

Part-Time
Workplace

Sub study areas:

Allied Health

This qualification reflects the role of workers who provide therapeutic and program related support to allied health professionals. The worker is required to conduct therapeutic and program related activities under the guidance of an allied health professional. Supervision may be direct, indirect or remote and must occur within organisation requirements. The worker is required to identify client circumstances that need additional input from the allied health professional. The worker may be engaged to work in a specialty area or work generically across the organisation in delivery of allied health assistance services. The worker, in conjunction with the allied health professional, may have responsibility for supervising other allied health assistance workers.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
State ID: MAC12
Industry Education and Community Services
Half price^

Assist with Movement Skill Set

Delivered at:

Study modes:

On Campus

Sub study areas:

Aged Care

In this workshop, you will gain the skills to support people who need assistance with basic physical movement, which may be due to incapacity.
The workshop will cover the theoretical and practical aspects of client movement.

This course applies to workers in a range of community services or health contexts who provide front line support services within the context of an established individualised plan.

Techniques may include assisting a person:
Or moving a person:
  • off the floor
  • to be weighed
  • to change position in bed
  • to use crutches or other walking aids
  • when a hoist or mechanical lifter is used for transfers
  • who is falling
  • to a seated position
  • by wheelchair or trolley
  • between wheelchair or trolley and bed
  • to a standing position
  • from wheelchair to shower chair and toilet

The course runs across two 4-hour sessions.

Skill set
National ID: AUR30316
State ID: BAD3
Industry Automotive
Half price^

Certificate III in Automotive Electrical Technology

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Automotive Electrical

This qualification reflects the role of individuals who service, diagnose and repair electrical systems and components in vehicles in the automotive electrical service and repair industry.  (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course). This course may also be available through Recognition of Prior Learning to eligible applicants.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: AUR20516
State ID: AB06
Industry Automotive
Half price^

Certificate II in Automotive Servicing Technology (Heavy Vehicle Servicing Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Vehicle Servicing

This qualification will provide you with skills and knowledge used in the heavy automotive vehicle servicing sector. You will learn skills in carrying out heavy vehicle servicing operations, inspecting and servicing engines, steering and suspension systems, repairing single electrical circuits, using and maintaining workplace tools and equipment.  You will also learn how to apply safe work practices and apply basic automotive troubleshooting processes in the heavy automotive context.

This course is Competitive and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: AUR20516
State ID: AB05
Industry Automotive
Half price^

Certificate II in Automotive Servicing Technology (Light Vehicle Servicing Pre-Apprenticeship)

Study modes:

Full-Time

Sub study areas:

Vehicle Servicing

This qualification will provide you with skills and knowledge used in the automotive vehicle servicing sector. You will learn skills in carrying out servicing operations, inspecting and servicing engines, steering and suspension systems, repairing single electrical circuits, using and maintaining workplace tools and equipment.
You will also learn how to apply safe work practices and apply basic automotive troubleshooting processes.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
State ID: MAB40
Industry Agriculture, Animals, Science and the Environment
Half price^

Back Pack/ Boom Spray Combined Skill Set

Delivered at:

Study modes:

On Campus

Sub study areas:

Agriculture

Description

This course is for those seeking to obtain the mandatory licence required to meet Health Department requirements for a Pest Management Technician licence if you are spraying chemicals for commercial gain.
If only a backpack or hand held device is used for spot spraying then this course is suitable.
It may lead to employment in Lawn & Garden, Landscaping, Bushland & Mine Site Rehabilitation.

Skills and knowledge elements include:
    Common weeds found in WA
    Common weed controls used in WA (following Integrated Pest Management strategies)
    Safe disposal of chemical residue and containers
    Correct Personal Protective Equipment for selected control measures
    Understanding a chemical label, schedules and use of chemicals
    Understanding Material Safety Data Sheets (MSDS)
    Groups of chemicals and their formulations

The Backpack course is held over three days, covering three units of competency.

Those that enrol in the Boomspray course attend the first three days and then two additional days to complete the extra three units.

BACKPACK SPRAY   UNITS
BOOMSPRAY UNITS
  • AHCPMG301 – Control weeds
  • AHCCHM307 – Prepare and apply chemicals to control pests, weeds and diseases
  • AHCCHM304 – Transport and store chemicals
  • AHCPMG302 – Control plant pests, diseases and disorders
  • AHCCHM404 – Develop procedures to minimise risks in the use of chemicals
  • AHCCHM405 – Plan and implement a chemical use program

Entry requirements

If you are not seeking to apply for a Health Department license, then this course will give inexperienced participants skills and knowledge to apply chemicals safely.
It is recommended that participants completing this course have significant prior knowledge and skills in spraying chemicals if looking to obtain a spraying license for lawn and garden, landscaping or mine site rehabilitation through the WA Health Department..

This course will be offered at these campuses: Albany

If a campus offering this course is not featured in the menu list below or doesn’t have dates, it means they don’t have dates set right now but they are being planned. You can keep checking this page or use the enquiry form to register your interest.

Skill set
National ID: MAB39
State ID: MAB39
Industry Hospitality, Tourism and Events
Half price^

Barista

Study modes:

Sub study areas:

Commercial Cookery

Description

This theory and practical workshop based course starts with the growing and roasting of the beans and leads you through the process of extracting the perfect espresso and making the complete menu of espresso drinks.

You will learn, understand and put into practice the basics of espresso coffee. Also included is coffee cultivation and processing, roasting and blending, different coffee styles, coffee bean storage, grinder setting, adjustment and milk texturing and espresso machine cleaning.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units.

    SITXFSA001 Use Hygienic Practices for Food Safety
    SITHFAB005 Prepare and Serve Espresso Coffee

 

Short course
National ID: CPC30111
State ID: D390
Industry Building and Construction
Half price^

Certificate III in Bricklaying/Blocklaying

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Bricklaying and Blocklaying

This qualification will prepare you with the skills and knowledge to work in the building and construction bricklaying trade. You will learn how to lay and bond bricks and similar building blocks and how to construct ornamental panels, feature walls, arches and columns. You will learn how to lay bricks for domestic, commercial and public buildings. You will also learn how to prepare and maintain brickwork.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CPC40208
State ID: W606
Industry Building and Construction
Half price^
Online

Certificate IV in Building and Construction (Contract Administration)

Delivered at:

Study modes:

Flexible
Online
Traineeship

Sub study areas:

General Construction

This qualification is designed to meet the needs of contract administrators and clerical support personnel working in small to medium-sized organisations. Participants will learn about Contract Law, and the Building Codes and Standards, providing them with the practical skills and knowledge to:

  • Prepare and administer a construction contract
  • Ensure compliance with contract provisions
  • Sourcing and procuring project resources
  • Apply risk management
  • Process client requirements
  • Issue construction reports
  • Quality and risk management
  • Workplace safety processes
  • Building applications and approvals
  • Interpret plans and specifications

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: 52824WA
State ID: AB25
Industry Building and Construction
Half price^

Certificate II in Building and Construction (Pathway - Trades) (Brick and Block Laying Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Bricklaying and Blocklaying

When you complete this course you will be ready for a career in the bricklaying and blocklaying trade. You will have the skills and knowledge to apply basic bricklaying and blocklaying techniques.

This course is Competitive at all campuses and additional Entrance Requirements apply. 

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: 52824WA
State ID: AB31
Industry Building and Construction
Half price^

Certificate II in Building and Construction (Pathway - Trades) (Carpentry and Joinery Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Carpentry and Joinery

This is a pre-vocational course for learners seeking a career in a construction trade. The first stage of the course is common to 11 construction trades and provides an introduction to the industry, its culture, occupations, job roles and workplace expectations.

The units of competency cover essential occupational health and safety requirements, the industrial and work organisation structure, communication skills, work planning, and basic use of tools and materials. Learners are able to consider the 11 trades during the initial stage and while attending work experience.

This course is Competitive and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: 52824WA
State ID: AB29
Industry Building and Construction
Half price^

Certificate II in Building and Construction (Pathway - Trades) (Painting and Decorating Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Painting and Signcraft

 

The aim of this pre-apprenticeship is to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into an indentured apprenticeship.

Skills developed include:

  • painting techniques 
  • interpreting plans 
  • preparing surfaces 
  • measuring 
  • calculating the right amount of materials for the job 
  • working with scaffolding safely at heights and
  • workplace health and safety

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Certificate II
National ID: BSB40215
State ID: AVV9
Industry Business and Finance
Half price^
Online

Certificate IV in Business

Study modes:

Flexible
Full-Time
Online
Part-Time
Traineeship
Workplace

Sub study areas:

Business

Improve your workplace performance by developing your business administration skills with a Certificate IV in Business qualification. You will learn a variety of business principles designed to prepare you for a broad range of industry environments, gaining skills and knowledge in areas such as – customer service, workplace communication and organisation, project work and risk management.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: MSF31113
State ID: J739
Industry Building and Construction
Half price^

Certificate III in Cabinet Making

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Carpentry and Joinery

This qualification covers the skills and knowledge required to perform a range of skills at trade-level for those working in furniture making and those involved in the manufacture and installation of fitted furniture typically in a kitchen, bathroom and related context. Installation skills may be applied to new or renovation work. The work is in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CPC32011
State ID: D409
Industry Building and Construction
Half price^

Certificate III in Carpentry and Joinery

Study modes:

Apprenticeship

Sub study areas:

Carpentry and Joinery

Do you want to build a strong career from the ground up?

When you complete the Certificate III in Carpentry and Joinery you will be ready for a career as a domestic or commercial carpenter. You will gain the knowledge and skills to carry out a range of building and construction tasks; use basic carpentry tools, power tools, carpentry materials; construct a pitched roof, ceiling frame, wooden flooring; interpret plans; and apply work health and safety requirements. The Certificate III in Carpentry and Joinery is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
State ID: MAA11
Industry Agriculture, Animals, Science and the Environment
Half price^

Chainsaw

Study modes:

On Campus

Sub study areas:

Agriculture

Description

This course covers the process of maintaining, preparing and operating hand-held chainsaws in a work environment.

These skills can be transferred to the homestead, are useful for home gardners and could lead to employment in parks and gardens or landscaping.

You will gain skills and knowledge in understanding the correct type of chainsaw for a particular task, how to use the chainsaw, maintain the chainsaw and store suitable personal protective equipment.

You will also carry out routine checks and maintenance on a chainsaw, apply appropriate chainsaw techniques, cutting methods according to manufacturer’s specifications and documented low risk work procedures; assess and minimise environmental impacts of chainsaw use; maintain records of chainsaw training and certification, risk assessment and use.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    AHCMOM213 Operate and Maintain Chainsaws

Short course
National ID: SIT30816
State ID: AZU5
Industry Hospitality, Tourism and Events
Half price^

Certificate III in Commercial Cookery

Study modes:

Apprenticeship
Full-Time
International
Workplace

Sub study areas:

Commercial Cookery

This qualification will provide you with the practical skills and knowledge to plan, organise, prepare and cook food in a commercial kitchen environment. You will learn about effective communication, occupational health and safety procedures and workplace hygiene. You will also learn skills to produce quality foods, plan menus, prepare food according to dietary or cultural needs, control costs, work as part of a team, and serve a range of meals in a professional manner. You will practice the skills you have learned in a simulated work environment or at an appropriate hospitality establishment.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: SIT40516
State ID: AZW3
Industry Hospitality, Tourism and Events
Half price^

Certificate IV in Commercial Cookery

Delivered at:

Study modes:

Full-Time
International

Sub study areas:

Commercial Cookery

This qualification reflects the role of commercial cooks who have a supervisory or team leading role in the kitchen. They operate independently or with limited guidance from others and use discretion to solve non-routine problems. This qualification provides a pathway to work in organisations such as restaurants, hotels, clubs, pubs, cafes and coffee shops, or to run a small business in these sectors.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: CHC22015
State ID: AWJ7
Industry Education and Community Services
Half price^

Certificate II in Community Services

Study modes:

Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Community Services

This qualification will provide you with the practical skills and knowledge to participate in local government and community organisations that seek to encourage and assist community groups to identify their needs, and plan and develop appropriate services and facilities to meet those needs. You will learn about the community services sector and ethical behaviour. You will also develop skills in communication, information provision and processing, administration support, networking and group support.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: CHC32015
State ID: AWJ2
Industry Education and Community Services
Half price^

Certificate III in Community Services

Study modes:

Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Community Services

The Certificate III in Community Services reflects the role of entry level community services workers who support individuals through the provision of person-centred services. Work may include day-to-day support of individuals in community settings or support the implementation of specific community-based programs.

At this level, work takes place under the direction of others and supervision may be direct or indirect. Work may take place in a range of community services organisations.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC42015
State ID: AWL8
Industry Education and Community Services
Half price^

Certificate IV in Community Services

Delivered at:

Study modes:

Full-Time
Part-Time

Sub study areas:

Community Services

This qualification reflects the role of community service workers who design and deliver person-centred services to individuals and/or groups. Workers may provide support, advocacy or interventions to individual clients, groups or communities across a range of services.

At this level, workers may be autonomous with limited responsibility within established parameters and may be required to supervise and lead other workers in projects or teams. Work may take place in a range of community service, case work or case management contexts.

This course is Competitive at all campuses and additional Entrance Requirements apply. 

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: CHC52015
State ID: AWM0
Industry Education and Community Services
Half price^

Diploma of Community Services

Delivered at:

Study modes:

Flexible
Full-Time
Part-Time

Sub study areas:

Community Services

This qualification addresses work in roles that usually involve service delivery, either direct client work and/or community education or development projects.

Workers at this level operate at an advanced skill level and may also have responsibility for the supervision of other staff and volunteers.

The training package does not specify any mandatory entry requirements into this course. However, prospective students should note that a mandatory part of the course requires you to participate and complete a supervised work placement, in a suitable environment that provides the services in your selected area of study. Before you commence work placement, you may be required to obtain a police clearance (approximately $72). Please check when you enquire as to whether a police clearance is required for your work placement.

It is strongly recommended you also consult with your doctor about having a flu vaccination.

Further information on work placement requirements can be obtained from the CHC Training Package Implementation Guide

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Diploma
State ID: MAB54
Industry Building and Construction
Half price^

Confined Spaces Skill Set

Study modes:

On Campus

Sub study areas:

General Construction

Description

This course will provide you with the knowledge and skills required to enter and work in confined spaces in the Resources and Infrastructure Industries.

In this course you will learn the requirements for working in confined spaces including:

► timely completion of entering and working in confined spaces safely
► work within a confined space and compliance with the permit conditions
► procedures, records and techniques,
► knowledge of the legislation and relevant standards
► site/organisation risk assessment guidelines,
► use and maintenance of appropriate PPE and more.

South Regional TAFE has a purpose-built customised training facility onsite at our Albany Campus.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

RIIWHS202D Enter and Work in Confined Spaces

To remain current, it is recommended that you complete this course every two years

This course will be offered at these campuses: Albany, Esperance, Katanning, Manjimup and Narrogin.
If a campus offering this course is not featured in the menu list below or doesn’t have dates, it means they don’t have dates set right now but they are being planned. You can keep checking this page or use the enquiry form to register your interest.

Skill set
National ID: AHC21016
State ID: BDF0
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate II in Conservation and Land Management

Study modes:

Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Conservation and Land Management

This qualification provides an occupational outcome in conservation and land management.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: HLT35015
State ID: AYX5
Industry Health, Beauty and Fitness
Half price^

Certificate III in Dental Assisting

Delivered at:

Study modes:

Flexible
Part-Time
Traineeship
Workplace

Sub study areas:

Health Services

Dental Assisting. It will boost your skills and knowledge, enhance your understanding of your role and equip you to serve as a respected member of a dental practice team.   

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: HLT45015
State ID: AYY9
Industry Health, Beauty and Fitness
Half price^

Certificate IV in Dental Assisting

Delivered at:

Study modes:

Flexible
Part-Time
Traineeship
Workplace

Sub study areas:

Health Services

This qualification reflects the role of workers who provide an advanced level of assistance to a dentist, dental hygienist, dental prosthetist, dental therapist or oral health therapist, which contributes to the quality of oral health care.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: ICT40815
State ID: AVZ6
Industry Information Technology, Library and Digital
Half price^

Certificate IV in Digital Media Technologies

Delivered at:

Study modes:

Flexible
Full-Time
Part-Time
Traineeship

Sub study areas:

General IT

This qualification provides the skills and knowledge for an individual to be competent in designing, developing and utilising basic multimedia briefs either as an independent ICT specialist or as part of a team. You will gain knowledge in photography and image manipulation, video editing and camera techniques, design and creation of websites and multimedia presentations.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: CHC30113
State ID: J587
Industry Education and Community Services
Half price^

Certificate III in Early Childhood Education and Care

Study modes:

Flexible
Full-Time
International
Part-Time
Traineeship
Workplace

Sub study areas:

Early Childhood Education and Care

Do you want a career nurturing our future?

When you complete the Certificate III in Early Childhood Education and Care you’ll be on your way to a career as a preschool assistant or childcare centre assistant. You will gain the knowledge and skills to work effectively as an educator, supporting the development and wellbeing of children aged 0 to 5 years, understanding children’s learning, providing learning support, working with children from culturally diverse backgrounds, identifying and responding to children at risk, and workplace health and safety.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC50113
State ID: J594
Industry Education and Community Services
Half price^

Diploma of Early Childhood Education and Care

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Early Childhood Education and Care

This qualification reflects the role of early childhood educators who are responsible for designing and implementing curriculum in early childhood education and care services. In doing so they work to implement an approved learning framework within the requirements of the Education and Care Services National Regulations and the National Quality Standard.

This course is ideal for those persons with a passion for working with young children. There is a large emphasis on practical application of your skills. Work placements will be organised by the college in local early childhood enterprises. If you are already working in the industry, you may wish to enquire to study as a flexible student and complete assessments on work-based projects. Recognition of prior learning (RPL) is also available for people with substantive, recent industry experience in a licensed Early Childhood Education and Care setting.

This qualification is for educators in early childhood education and care services who are responsible for planning, implementing and managing programs in accordance with approvals, quality rating systems and duty of care requirements.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Diploma
National ID: CHC30213
State ID: J588
Industry Education and Community Services
Half price^
Online

Certificate III in Education Support

Study modes:

Flexible
Full-Time
Online
Part-Time
Traineeship
Workplace

Sub study areas:

Education Services

This qualification will provide you with the practical skills and knowledge to assist the teaching staff in schools and provide care and supervision for children from kindergarten to Year 10. You will learn how to implement planned education programs, assist students in their learning and development, contribute to the safety and health of students and support students with additional needs.

You will also learn how to work with children and young people at risk of harm, work effectively with culturally diverse students, families and co-workers and gain an introductory knowledge into working with children with special needs. As part of this qualification you will undertake a supervised work placement where you will be able to apply the skills and knowledge you have learned.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Flexible study is available to be commenced all year round.

 

Certificate III
National ID: UEE22011
State ID: AA41
Industry Building and Construction
Half price^

Certificate II in Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Electrical and Electrotechnology

This entry level qualification will provide you with the practical skills and knowledge to work safely in an electrotechnology environment, solve problems in multiple d.c. circuits and extra low voltage single path circuits. You will learn skills that will enable you to identify the required components/materials and use routine equipment, plant or technology relevant to the electrotechnology industry.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: UEE30811
State ID: A123
Industry Building and Construction
Half price^

Certificate III in Electrotechnology Electrician

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Electrical and Electrotechnology

This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an 'Electrician's licence' and experience in telecommunications service cabling.  (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course). This course may also be available through Recognition of Prior Learning to eligible applicants.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

 

Certificate III
National ID: MEM20105
State ID: AA50
Industry Engineering and Mining
Half price^

Certificate II in Engineering (Heavy Fabrication Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Fabrication

Are you geared up for a big career working on the big gears?

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing and drafting, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and math. You will practice the skills you have learned in a workshop environment.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: MEM20105
State ID: AA52
Industry Engineering and Mining
Half price^

Certificate II in Engineering (Light Fabrication Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Engineering

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing, load
shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and math. 

Certificate II
National ID: MEM20105
State ID: AA49
Industry Engineering and Mining
Half price^

Certificate II in Engineering (Mechanical Fitter and Machinist Pre-Apprenticeship)

Delivered at:

Study modes:

Full-Time

Sub study areas:

Mechanical

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing, load shifting, thermal cutting and the dismantling, replacement and repair of engineering components. You will also learn about safety in the workplace, computing and math. You will practice the skills you have learned in a workshop environment.

This course is Competitive and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: MEM30305
State ID: WT76
Industry Engineering and Mining
Half price^

Certificate III in Engineering - Fabrication Trade (Heavy Yg)

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Fabrication

This qualification provides you with the skills and knowledge to work in the engineering fabrication industry. You usually have to complete an apprenticeship in fabrication trade, which involves both on and off the job training. The off-the-job training is provided through Registered Training Organisations. To enter you need to be employed. For more details on apprenticeships call the New Apprenticeships Referral Line on 1800 639 629 (FREECALL).

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: MEM30305
State ID: WT77
Industry Engineering and Mining
Half price^

Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH)

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Engineering
Fabrication

This qualification will provide you with trade level practical skills and knowledge in fabrication and welding, using industry standard technologies and techniques. You will learn skills in using tools, measuring and calculating, technical drawing, load shifting, thermal cutting, using forging and casting equipment, and advanced welding to trade standard. (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course). This course may also be available through Recognition of Prior Learning to eligible applicants.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

 

Certificate III
National ID: MEM30205
State ID: WT83
Industry Engineering and Mining
Half price^

Certificate III in Engineering - Mechanical Trade (Fitter and Machinist ZB)

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Engineering
Mechanical

This qualification will provide you with trade level practical skills and knowledge in fitting and machining, using industry standard technologies and techniques. You will learn skills in the maintenance and repair of machinery, including complex lathe and milling operations and precision measurement, levelling and alignment techniques. (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course). This course may also be available through Recognition of Prior Learning to eligible applicants.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: MEM30205
State ID: WT86
Industry Engineering and Mining
Half price^

Certificate III in Engineering - Mechanical Trade (Mechanical Fitter ZA)

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Engineering
Mechanical

Are you looking for a career making and fixing all things mechanical?

When you complete the Certificate III in Engineering (Mechanical Fitter ZA) you'll be looking at a trades career as a machinist metal, mechanical fitter, metal plater or plant mechanic in industries such as mining, automotive, or hydraulics. You will gain the skills and knowledge to work with pumps and hydraulics, pneumatic systems, mechanical drives and transmissions, using workshop machines, hand and power tools, arc welding, thermal cutting, measuring, technical drawing, and workplace health and safety.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: MEM30205
State ID: WT90
Industry Engineering and Mining
Half price^

Certificate III in Engineering - Mechanical Trade (Plant Mechanic ZG/Z)

Delivered at:

Study modes:

Apprenticeship

Sub study areas:

Engineering
Mechanical

This is a generic qualification for the mechanical trade that provides a number of pathways for apprenticeship. Learners would identify trade training in Machinist Metal, Mechanical Fitter, Metal Plating and Plant Mechanic.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
State ID: MAB70
Industry Health, Beauty and Fitness
Half price^

First Aid

Study modes:

On Campus

Sub study areas:

Health Services

Description

This course covers a broad range of topics to enable participants to confidently manage emergency situations and provide a first aid response to a casualty. It is suitable to both people in workplaces and members of the public who want training in first aid.

This course is available as a 1 or 2 day course.

Extra requirement for 1 day course: A workbook and learner guide will be sent to you with your invoice. The workbook needs to be completed prior to class and must be handed to the lecturer in class. This is part of your assessment.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    HLTAID003 Provide First Aid

Short course
State ID: MAA38
Industry Education and Community Services
Half price^

First Aid in Child Care

Study modes:

On Campus

Sub study areas:

Early Childhood Education and Care

Description

This unit of competency has been approved by Australian Children’s Education and Care Quality Authority (ACECQA) who have deemed it to satisfy all requirements for first aid, anaphylaxis management and emergency asthma training under the Education and Care Services National Regulations (2011).

The unit applies to educators and support staff working within an education and care setting who are required to respond to a first aid emergency, including asthmatic and anaphylactic emergencies.

Learning Outcomes:
    Anaphylaxis
    Asthma
    CPR techniques on adults, children and infants
    Compliance with first aid sections of the Education and Care Services National Law and the Education and Care Services National Regulations (2011)
    Incident reporting in a child care setting
    Child physiology
    How to properly assess an emergency situation
    DRSABCD
    Using an Automated External Defibrillator (AED)
    First aid procedures for bleeding, burns and fractures
    Managing medical conditions such as epilepsy
    Managing medical emergencies such as snake/spider bites, poisons and choking
    Infection control procedures
    Managing exposure to extreme temperatures
    Administering first aid for eye & soft tissue injuries
    Assessing and moving sick & injured
    Legal responsibilities of a first aider
    Basic anatomy
    Managing shock

Entry requirements

Students will be required to complete the Safety Corp Workbook and a First Aid Manual prior to course attendance.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units.

    HLTAID004 Provide an Emergency First Aid Response in an Education and Care Setting

Short course
State ID: MAB39
Industry Hospitality, Tourism and Events
Half price^

Food Safety Awareness

Delivered at:

Study modes:

On Campus

Sub study areas:

Commercial Cookery

Description

This food hygiene short course is for workers in the hospitality, and catering industries, including those who work in bars, restaurants, cafes, residential facilities, fast food shops, and canteens.
In this accredited course you will gain the skills for safe food handling practices for compliance with the Australia New Zealand Food Standards Code.
On completion of this course you will have the skills and knowledge to work hygienically within a food business and the certification to show prospective employers your commitment to food safety. 
The day will start with theory on subjects such as;
- Commonwealth, and state food safety laws, standards and codes
- How to identify food hazards
- How to report personal health issues
- How to prevent food and cross contamination

You will then go on to complete your assessment in class time, followed by your practical assessment in the kitchen or bar (depending on the campus you study at).
 

Certification

On successful completion of this course, students will receive a statement of attainment for the following units

SITXFSA001 Use Hygienic practices for food safety

 

Short course
State ID: MAA82
Industry Building and Construction
Half price^

Forklift

Study modes:

On Campus

Sub study areas:

General Construction

Description

This course will provide you with the knowledge and skills required to operate a forklift truck safely.
Participants will learn how to operate a forklift truck by planning the work, conducting routine checks on a forklift truck, shifting loads in a safe manner and safely shut down and secure equipment after completing operations.

Industry licensing information

This course will equip students with the correct qualifications to obtain the National High Risk Licence class LF.
Students must apply and pay for this license separately with WorkSafe.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

  • TLILIC0003 Licence to Operate a Forklift Truck
Short course
State ID: MAA14
Industry Building and Construction
Half price^

Front End Loader Skill Set

Delivered at:

Study modes:

On Campus

Sub study areas:

General Construction

Description

This course trains novice operators in the skills required to enter the industry as a certified wheeled front end loader operator.

The course covers:
    Plan and prepare for wheel loader operations    
    Operate the wheel loader    
    Carry out operator maintenance    
    Carry out housekeeping activities

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    AHCMOM207 Conduct Front-end Loader Operations

and an Accreditation wallet card.

This course will be offered at these campuses: Albany

If a campus offering this course is not featured in the menu list below or doesn’t have dates, it means they don’t have dates set right now but they are being planned. You can keep checking this page or use the enquiry form to register your interest.

Skill set
National ID: HLT23215
State ID: AYY2
Industry Health, Beauty and Fitness
Half price^

Certificate II in Health Support Services

Delivered at:

Study modes:

Full-Time
Part-Time

Sub study areas:

Health Services

This qualification reflects the role of workers who provide support for the effective functioning of health services. At this level workers complete tasks under supervision involving known routines and procedures or complete routine but variable tasks in collaboration with others in a team environment.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: AUR31116
State ID: BAF2
Industry Automotive
Half price^

Certificate III in Heavy Commercial Vehicle Mechanical Technology

Study modes:

Apprenticeship

Sub study areas:

Vehicle Servicing

This course will expand your knowledge and practical skills specific to heavy commercial vehicles, including steering, braking and hydraulic systems.  You will learn how to carry out diagnostic procedures and undertake appropriate repairs, identifying and applying safe work practices in the heavy automotive industry (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course).  This course may also be available through Recognition of Prior Learning to eligible applicants.

This course is an apprenticeship:  you must be employed in a training contract by an appropriate organisation to study. To find out more regarding apprenticeships click here.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: AHC20416
State ID: BDE6
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate II in Horticulture

Study modes:

Full-Time
Part-Time
Traineeship

Sub study areas:

Horticulture and Conservation

This course is for any interested people that want to learn a more about gardening and general horticultural practices. Such people may want to commence their own business or seek employment as a nursery hand within established horticultural businesses. There are no pre-requisites for this course aside from a strong interest in this industry area.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate II
National ID: AHC30716
State ID: BDF1
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate III in Horticulture

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Horticulture and Conservation

Are you looking for a career among the trees? When you complete the Certificate III in Horticulture you will be ready for a career working with plants as school or council gardener, groundskeeper, or self-employed landscaper. You will have the skills and knowledge to work effectively in the horticultural industry, implement propagation plans, control weeds, pests, and diseases, safely prepare, store, and apply chemicals, install irrigation, create plant displays, plant identification and nutrition, and workplace safety and health.

South Regional TAFE Campuses have well designed horticulture facilities.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: AHC40416
State ID: BCW2
Industry Agriculture, Animals, Science and the Environment
Half price^

Certificate IV in Horticulture

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Horticulture and Conservation

This qualification allows individuals to develop post-trade skills and knowledge across a broad coverage of the industry prior to undertaking higher level roles in the industry.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: AHC50416
State ID: BDD0
Industry Agriculture, Animals, Science and the Environment
Half price^

Diploma of Horticulture

Delivered at:

Study modes:

Full-Time
Part-Time

Sub study areas:

Horticulture and Conservation

This qualification will provide you with the practical skills and knowledge needed to establish and manage horticultural enterprises. You will attain the skills required to be able to specifically manage plant health programs, provide specialist advice, develop production plans and carry out financial tasks associated with estimates, tenders and quotes.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Diploma
National ID: SIT30616
State ID: AZT7
Industry Hospitality, Tourism and Events
Half price^

Certificate III in Hospitality

Study modes:

Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Hospitality

Like to work in restaurants, hotels, motels, clubs, pubs, cafes or coffee shops? If you’re a “people person” with a natural flair for dealing with customers and enjoy the cut and thrust of working in busy restaurants or cafés, tropical resorts, bars, nightclubs, hotels or even on an airliner or cruise ship, then a course in hospitality may be ideal for you. Gaining skills in customer service, effective teamwork, hygiene and food safety could give you a great start in this career. Depending on your choice of elective units, you will also learn about accommodation services, commercial cookery and catering, food and beverage, gaming and tourism sales and operations.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC33015
State ID: AA66
Industry Education and Community Services
Half price^

Certificate III in Individual Support (Ageing)

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace
Workshops

Sub study areas:

Aged Care

When you complete the Certificate III in Individual Support you'll be on your way to a career as an aged care assistant.
You will gain the knowledge and skills to work effectively in the aged care industry, caring for the elderly, enabling them to maintain independence, understanding and supporting people with dementia, safety procedures, ethical behaviour, infection control, working with cultural diversity, and workplace health and safety.
This course includes a compulsory work placement. The units in Traineeships are customised according to the individual Training Agreement that is negotiated with the employer and may vary (within the Qualification rules) in each case.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC33015
State ID: AB71
Industry Education and Community Services
Half price^

Certificate III in Individual Support (Ageing, Home and Community)

Delivered at:

Study modes:

Flexible
Part-Time
Workplace
Workshops

Sub study areas:

Aged Care

Caring in the home and community
When you complete the Certificate III in Individual Support you'll be on your way to a career as an aged care assistant.  
This course specialises in providing home and community support services and also supports relationships with carers and families.   
You will gain the knowledge and skills to work effectively in the aged care industry, caring for the elderly, enabling them to maintain independence, understanding and supporting people with dementia, safety procedures, ethical behaviour, infection control, working with cultural diversity, and workplace health and safety.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC33015
State ID: AA67
Industry Education and Community Services
Half price^

Certificate III in Individual Support (Disability)

Study modes:

Flexible
Full-Time
Part-Time
Traineeship
Workplace

Sub study areas:

Disability Services

This qualification reflects the role of workers in the community and/or residential setting who follow an individualised plan to provide person-centred support to people who may require support due to disability or some other reason. Work involves using discretion and judgement in relation to individual support as well as taking responsibility for own outputs. Workers have a range of factual, technical and procedural knowledge, as well as some theoretical knowledge of the concepts and practices required to provide person-centred support. This course includes a compulsory work placement.

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: CHC33015
State ID: AA68
Industry Education and Community Services
Half price^

Certificate III in Individual Support (Home and Community)

Delivered at:

Study modes:

Part-Time

Sub study areas:

Community Services

This qualification reflects the role of workers in the community and/or residential setting who follow an individualised plan to provide person-centred support to people who may require support due to ageing, disability or some other reason. Work involves using discretion and judgement in relation to individual support as well as taking responsibility for own outputs. Workers have a range of factual, technical and procedural knowledge, as well as some theoretical knowledge of the concepts and practices required to provide person-centred support.
This course includes a compulsory work placement.
 

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate III
National ID: ICT40118
State ID: BEH4
Industry Information Technology, Library and Digital
Half price^

Certificate IV in Information Technology

Delivered at:

Study modes:

Full-Time

Sub study areas:

General IT

This qualification provides the skills and knowledge for an individual to be competent in a wide range of general information and communications technology (ICT) technologies and practices in different organisational contexts.

Persons working at this level apply a wide range of knowledge and skills in basic networking, ICT support, testing, systems analysis and design, database development, programming and web development support.

Students who complete a Certificate IV in Information Technology can expect to find employment in technical positions and in small-to-medium businesses that have either general or specific IT requirements.  For example, hardware builds and repairs, software design, web development.

The Certificate IV in Information Technology will also provide a solid foundation for continued study in the Information Technology field, particularly at Diploma or university level. 

This course is Competitive at selected campuses and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: ICT40418
State ID: BEH0
Industry Information Technology, Library and Digital
Half price^

Certificate IV in Information Technology Networking

Delivered at:

Study modes:

Full-Time
Part-Time
Traineeship

Sub study areas:

Networking and Security

This qualification will further develop your practical skills and knowledge in the installation and management of small scale networks. You will learn skills in installation, configuration, monitoring and administration of a network, automating network processes, network security You will also learn about effective communication, documentation and general business skills.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Certificate IV
National ID: ICT50418
State ID: BEH6
Industry Information Technology, Library and Digital
Half price^

Diploma of Information Technology Networking

Delivered at:

Study modes:

Full-Time
Part-Time

Sub study areas:

Networking and Security

This qualification provides the skills and knowledge for an individual to manage, as an independent ICT specialist or as part of a team, the installation of a range of networks, including internetworking, security and e-business integration.
Study modes and durations differ depending on your local campus. Please check with your local campus for more information.
 

Diploma
National ID: ICT30118
State ID: BEH2
Industry Information Technology, Library and Digital
Half price^
Online

Certificate III in Information, Digital Media and Technology

Study modes: