Home | Sub Study Area | Residential Building Drafting

Residential Building Drafting

Diploma of Building Design

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview
Fees and charges
Units
How to apply
Important information
Enquire now
Call us: 1800 621 445
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

This course was available for Semester 2, 2016.
This course is available for Semester 1, 2017.

Clean up clone

Link to photo for PDF:

Photo override if needed:

TAFE title:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate IV in Residential Building Drafting

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview
Fees and charges
Units
How to apply
Important information
Enquire now
Call us: 1800 621 445
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

This course was available for Semester 2, 2016.
This course is available for Semester 1, 2017.

Clean up clone

Link to photo for PDF:

Photo override if needed:

TAFE title:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Introduction to Revit Architecture

State ID: MAB11

Description

This is a level 1 introduction to Revit 2018 Architecture, a powerful building modeler used extensively for architectural design, documentation and rendering in 2D and 3D.
This unit supports the work of drafters who assist and work under the supervision and instruction of architects, building designers and other personnel such as home sustainability assessors.
It covers installing BIM-capable design software and applying its functions and options to create, name and save project files and templates for different types of building design projects.

Entrance Requirements

Fees and charges

How to apply

Entrance Requirements

No minimum requirements

Fees and charges

Non-Concession: $217.65
Concession: N/A
Commercial / International: $341.55

School age students
Students who would normally be attending year 12 or below in the current calendar year will be eligible to enrol at the commercial / international rate for this course.

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses
Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

Bunbury Campus
Date: Register your interest for 2020
Time: To be advised
Duration: To be advised

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

2D AutoCAD Drafting

State ID: MAA43

Description

This course is suitable for learners who would like to gain basic 2D drafting skills using the AutoCAD software package.
Topics covered:

    AutoCAD interface and start a new drawing
    AutoCAD drawing tools and modify commands
    Precision drawing
    Working with layers
    World and User Coordinate Systems
    Hatch, text and tables
    Blocks/external references
    Working with dimensions
    Printing

Entrance Requirements

Fees and charges

How to apply

Entrance Requirements

No minimum requirements

Fees and charges

Non Concession: $222.65
Concession: N/A
Commercial / International: $346.55

School age students
Students who would normally be attending year 12 or below in the current calendar year will be eligible to enrol at the commercial / international rate for this course.

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses
Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

Albany Campus
Date: Register your interest for 2020
Time: To be advised
Duration: 10 Sessions
Bunbury Campus
Date: Register your interest for 2020
Time: To be advised
Duration: 10 evenings

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Diploma of Building Design

National ID: CPP50911 | State ID: D772

This qualification applies to building designers who undertake building design projects covered by the Building Code of Australia (BCA), except Construction Type A buildings. Building designers may specialise in residential projects, including new buildings, heritage restorations and additions or renovations; or they may also undertake commercial and industrial projects, such as factories, motels, offices, restaurants, retail or service outlets and warehouses.

Job opportunities

Study pathway

How to apply

Job opportunities

Successful completion of this qualification provides you with the opportunity to work in residential projects, commercial and industrial projects or service outlets and warehouses.

Study pathway

Graduate Certificate in Building Design

How to apply

Part time, flexible or online courses have rolling enrolments. For help enrolling or for more information contact your local campus.
Please note that all delivery modes may not be available at all campuses, please check with individual campuses on modes of study.

For full time courses, apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

Semester 1

Bunbury - Full Time

Overview

Fees and charges

Units

Overview
Duration 24 months
When Semester 1
Where Bunbury
How Full-Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate IV in Residential Building Drafting

National ID: 52757WA | State ID: YN65

This qualification will provide you with the practical skills and knowledge to prepare drawings, estimates and plans and liaise with architects, builders and contractors of residential buildings.

Job opportunities

Study pathway

How to apply

Job opportunities

On successful completion of the Certificate IV in Residential Building Drafting students will be able to work as a residential draftsperson.

Study pathway

CPP50911 Diploma of Building Design

How to apply

Part time, flexible or online courses have rolling enrolments. For help enrolling or for more information contact your local campus.
Please note that all delivery modes may not be available at all campuses, please check with individual campuses on modes of study.

For full time courses, apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

Semester 1

Albany - Full Time

Overview

Fees and charges

Units

Overview
Duration 12 months
When Semester 1
Where Albany
How Full-Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Acquire skills that enable you to specialise in both carpentry and joinery required to construct residential dwellings. You will also learn to use tools and equipment to install floors, walls, and roofs, and to construct and assemble windows, sashes, doors and stairs. Furniture making concentrates on the production of solid and free standing furniture, while cabinet making is the term given to flat panel construction of kitchen/bathroom furniture.

National ID State ID Title Qualification level Campus
52824WA BCY47 Building and Construction (Pathway - Trades) Certificate II Albany
Bunbury

When you complete this course you will be ready for a career in the ccarpentry and joinery trade. You will have the skills and knowledge to apply basic carpentry and joinery techniques.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

52824WA-AB31 AB31 Building and Construction (Pathway - Trades) (Carpentry and Joinery Pre-Apprenticeship) Certificate II Albany
Bunbury

This is a pre-vocational course for learners seeking a career in a construction trade. The first stage of the course is common to 11 construction trades and provides an introduction to the industry, its culture, occupations, job roles and workplace expectations.

The units of competency cover essential occupational health and safety requirements, the industrial and work organisation structure, communication skills, work planning, and basic use of tools and materials. Learners are able to consider the 11 trades during the initial stage and while attending work experience.

This course is Competitive and further Entrance Requirements may apply.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

MSF31113 J739 Cabinet Making Certificate III Albany
Bunbury

This qualification covers the skills and knowledge required to perform a range of skills at trade-level for those working in furniture making and those involved in the manufacture and installation of fitted furniture typically in a kitchen, bathroom and related context. Installation skills may be applied to new or renovation work. The work is in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

CPC32011 D409 Carpentry and Joinery Certificate III Albany
Bunbury
Esperance

Do you want to build a strong career from the ground up?

When you complete the Certificate III in Carpentry and Joinery you will be ready for a career as a domestic or commercial carpenter. You will gain the knowledge and skills to carry out a range of building and construction tasks; use basic carpentry tools, power tools, carpentry materials; construct a pitched roof, ceiling frame, wooden flooring; interpret plans; and apply work health and safety requirements. The Certificate III in Carpentry and Joinery is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

MSF20313 J727 Furniture Making Certificate II Bunbury

This qualification describes the skills and knowledge required to perform the manufacture of free-standing furniture or built-in cabinets, and provide on-site assistance in the installation of furniture or cabinets involving known routines and procedures and some accountability for the quality of outcomes.

It reflects vocational outcomes for those performing assistant cabinet maker, assistant installer of built-in cabinets, and production operator within a cabinet making enterprise. Cabinets include free-standing and built-in furniture or fitted cabinets, such as those used in kitchens and bathrooms. Skills are also included that cover assisting in the installation or renovation of kitchens and bathrooms and other fitted cabinets, which involves collaboration with others through members of a group or team. This qualification does not cover shopfitting.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

MSF20313-AA45 AA45 Furniture Making (Cabinet Making/Furniture Making Pre-Apprenticeship) Certificate II Bunbury

This is an entry level program for people intending to take up an apprenticeship in the cabinet/furniture making trade. You will acquire the skills and knowledge to work in the furniture-making sector of the furnishing industry. You will learn how to prepare surfaces, mix and apply stains, apply finishing material, restore furnishing items, and operate a range of furniture finishing equipment. You will also learn about occupational health and safety and communication skills.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

MAA81 Work Safely at Heights Short Course Albany
Bunbury
Esperance
Katanning
Manjimup
Narrogin

Description

This course identifies the risks associated with working at heights. Participants will be introduced to safe work practices, regulations and industry codes designed to contain height related work risks.
This course is for anyone who is required to work at height either on a personal or professional level, and who could be at risk of injury as a result of this work.
The course covers:
    Identify work requirements
    Identify work procedures and instructions
    Access and install equipment
    Perform work at heights
    Clean up work area

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    RIIWHS204D Work Safely at Heights

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

Residential Building Drafting

Learn skills to fix plasterboard sheets to walls and ceilings, fixing battens and mixing plastering compounds. You will also learn how to work effectively and sustainably in the construction industry, plan and organise work, carry out measurements and calculations and apply Work Health and Safety requirements.​

Painting and Decorating is known as the finishing trade of the building industry. It encompasses areas such as internal and external painting and decorating on a variety of surfaces, and includes the decoration of new and existing homes, hospitals, shops, hotels and buildings of historical significance. Signcrafters use a variety of materials and techniques such as painting, computer graphics, vinyl, wood, foam, plastic, glass, gold leaf and engraving to provide eye catching designs.

Pages