COVID-19 updates
Home | Sub Study Area | Graphic Design

Graphic Design

Diploma of Graphic Design

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview
Fees and charges
Units
How to apply
Important information
Enquire now
Call us: 1800 621 445
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

This course was available for Semester 2, 2016.
This course is available for Semester 1, 2017.

Clean up clone

Link to photo for PDF:

Photo override if needed:

TAFE title:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Preparatory Skill Set For Professional Graphic Design Practice

State ID: CUASS00049

Description

This skill set addresses fundamental skills, knowledge and performance requirements for graphic design practice.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    BSBDES302 Explore and Apply the Creative Design Process to 2D Forms
    BSBDES401 Generate Design Solutions
    CUAGRD302 Use Typography Techniques
    CUAGRD401 Research and Apply Graphic Design Techniques

Entrance Requirements

How to apply

Entrance Requirements

No minimum requirements

How to apply

For full time, part time, flexible or online courses apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Digital Photography Fundamentals - Beginners Photoshop Workshop

State ID: A1017P

Description

Following on from our popular Digital Photography Fundamentals Beginners Workshop comes our Digital Photography Fundamentals Beginners Photoshop Workshop.

This course offers a blend of helpful theory in easy-to-understand terms and clear demonstrations, so you can learn how to use this expansive software to enhance your photographic images.

Aimed at those who already have a good working knowledge of working with computers, this course will guide you towards gaining further skills and confidence in image manipulation.

Fees and charges

How to apply

Fees and charges

$185

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Bunbury Campus

Date: 21 November 2020
Time: 9.30am - 4.30pm
Duration: 1 day

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Digital Photography Fundamentals - Travel / Photo Stories Workshop

State ID: A1016P

Description

Following on from our popular Digital Photography Fundamentals Beginners Workshop comes our Digital Photography Fundamentals Travel / Photo Stories Workshop.

This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals, so you can learn how to put the theory into practice in a fun and supportive environment.

Fees and charges

How to apply

Fees and charges

$185

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Bunbury Campus

Date: 14 November 2020
Time: 9.30am - 4.30pm
Duration: 1 day

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Digital Photography Fundamentals - Still Life / Tabletop Workshop

State ID: A1015P

Description

Following on from our popular Digital Photography Fundamentals Beginners Workshop comes our Digital Photography Fundamentals Still Life Workshop.

This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals, so you can learn how to put the theory into practice in a fun and supportive environment.

Fees and charges

How to apply

Fees and charges

$185

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Bunbury Campus

Date: 7 November 2020
Time: 9.30am - 4.30pm
Duration: 1 day

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Digital Photography Fundamentals - Portraiture Workshop

State ID: A1014P

Description

Following on from our popular Digital Photography Fundamentals Beginners Workshop comes our Digital Photography Fundamentals Portraiture Workshop.

This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals so you can learn how to put the theory into practice in a fun and supportive environment.

Aimed at those who already have a good working knowledge of their camera, this course will guide you towards gaining further skills and confidence in this popular and engaging genre of photography.

Fees and charges

How to apply

Fees and charges

$185

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Bunbury Campus

Date: 24 October 2020
Time: 9.30am - 4.30pm
Duration: 1 day

 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Digital Photography Fundamentals - Beginners Workshop

State ID: A1013P

Description

Get the most out of your digital camera and unleash your creative potential by discovering how your camera really works, in this intensive two-day workshop.

Learn the fundamentals and advantages of using manual modes and controlling shutter speed, aperture and ISO, so you can progress to the next level of creative photography.

This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals, so you can learn how to put the theory into practice in a fun and supportive environment.

Fees and charges

How to apply

Fees and charges

$299

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Bunbury Campus

Date: 17 & 18 October 2020
Time: 9.30am - 4.30pm
Duration: 2 days

 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Diploma of Graphic Design

National ID: CUA50715 | State ID: AZK6

This qualification focuses on you starting your career in the Graphic Design industry. You will combine technical, creative and conceptual skills to create designs that meet client requirements and solve a range of visual communication challenges. Graphic designers work in many different commercial and community contexts across both print and digital media.

Job opportunities

Study pathway

How to apply

Job opportunities

Successful completion of this qualification provides the opportunity to become employed in Graphic Design, Advertising and Multimedia industries as practitioners and designers.

Study pathway

Advanced Diploma of Graphic Design

How to apply

For full time, part time, flexible or online courses apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Available Semester 1 & Semester 2

Esperance - Full Time, Part Time, Flexible, Online

Overview

Fees and charges

Units

Overview
Duration 3 semester/s
When Available Semester 1 & Semester 2
Where Esperance
How Full-Time
Other study options
This course may have other study modes available. For more information Complete an enquiry form below. Please Note: Study durations will vary depending on selected study mode.

Semester 2

Esperance - Online

Overview

Fees and charges

Units

Overview
Duration 3 semester/s
When Semester 2
Where Esperance
How Online
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Graphic Design

Gain the technical skills to explore your creativity through a wide range of mediums. Studying these courses may lead you to rewarding career opportunities in painting on canvas, public art, print, illustration, arts administration and events coordination, sculpturing and ceramics.

What type of course are you looking for?
FreeFree* Half priceHalf price* Half price in 2021Half price in 2021 Infection controlInfection control OnlineOnline Skill setsSkill sets
National ID State ID Title Qualification level Campus
MAB29 Creative Recycled Art
Short Course Bunbury
Busselton

Description

Would you like to guarantee your recyclable waste is getting recycled?

Most of us try to recycle where we can, but we can’t always be assured our waste ends up in the right place. More and more, we hear about our plastic footprint and experts say that by the year 2050, there will be more plastic in our oceans than fish!

Join us in this workshop using and combining recycled objects to create a unique sculptural piece that holds succulents. The workshop will explore different combinations of connecting the recycled objects, adding colour and texture then the succulents to create hanging or standing features.

The succulents and most of the recycled objects will be provided.  (You’re welcome to bring your own!).

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

     CUAPPR101 Use ideas and techniques to develop creative work

MAB28 Develop Printmaking Skills
Short Course Bunbury
Busselton

Description

This course covers basic printmaking techniques and is designed for anyone that is keen to learn a variety of printmaking techniques such as:

  • drypoint etching
  • relief printing
  • monoprinting​​​​​​

You will get to create and take home some exciting original prints.

All course materials are provided.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    CUAPRI201 Develop Printmaking Skills

MAB31 Develop Skills in Painting
Short Course Bunbury
Busselton

Description

Join us for a fun introduction to the world of colour. Exploring a range of painting styles, methods and techniques to help you build skills and develop your own personal style. 

Colour mixing, value, composition, abstract, still life and expressionist painting will all be covered in a relaxed and enjoyable environment.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

     CUAPAI201 Develop Painting Skills

MAA60 Digital Photography for Beginners
Short Course Bunbury
Busselton

Description

Get the most out of your digital camera.
Learn the fundamentals of using your DSLR in a fun and supportive environment.
Includes course notes, feedback and Q&A sessions.
Learn the advantages of using manual modes and controlling shutter speed, aperture and ISO, so you can progress to the next level of creative photography.
This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals so you can put the theory into practice.
Unleash your creative potential by discovering how your camera works.

Topics covered in this course include:
    Getting to know your DSLR camera and how it works
    How to control the camera using manual modes
    Shutter speed, aperture and ISO controls
    Focusing, light meter
    Understanding exposure
    Choosing the right lens for the job
    File formats – convenience versus quality
    How to best use light
    Qualities of light, composition, when to shoot
    Portraiture – photographing your family and friends
    Documenting your experiences, locations, travel
    Basic Photoshop
    Practicals, course notes, constructive feedback and student image review sessions

Requirements
    A DSLR camera or mirrorless camera with the option of manual mode, capable of manually adjusting shutter speed, aperture and ISO controls is essential for this course
    Interchangeable lenses – an added advantage
    Image card(s), Image card reader, USB, charged camera batteries and chargers
    The manual for your camera (most manufacturers have online manuals you can download via the web if necessary)
    A tripod – please bring if you have one
    Knowledge of working with computers
    Pen and notepad
    Course content includes completing assessment criteria

Please familiarise yourself with your cameras manual prior to starting the course.

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:
    ICPDMT321 Capture a Digital Image

MBB02 Drawing - Stage 3 Skill Set
Skill set Denmark

Description

In this course you will develop your skills to communicate and share in an arts environment and experience:

  • Drawing from nature
  • Drawing from the landscape
  • Observational drawing
  • Figure drawing
  • Experimental drawing

Certification

On successful completion of this course students will receive a statement of attainment for the following nationally accredited units:
BSBWHS201 – Contribute to health and safety of others
CUADRA201 – Develop drawing skills
BSBMM101 – Apply basic communication skills

This course will be offered at these campuses: Denmark

If a campus offering this course is not featured in the menu list below or doesn’t have dates, it means they don’t have dates set right now but they are being planned. You can keep checking this page or use the enquiry form to register your interest.

MAB03 Drawing Fundamentals
Short Course Bunbury
Busselton

Description

This course is suitable for beginners and people wanting to refresh their skills.
Learn how to see like an artist with this foundation drawing course.
You will learn fundamental techniques such as expressive line, tone, perspective and proportion, as well as how to use drawing materials.

Exercises explored in this course include:
    Still life
    Perspective
    Tonal Drawing
    Mark making & mixed media techniques

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units.

    CUAACD101 Use Basic Drawing Techniques

MAB15 Photography - Portraiture, People & Products
Short Course Bunbury
Busselton

Description

Know your camera basics but still unsure how to progress? Leading on from our popular Digital Photography for Beginners, you will learn more about the skills needed to move past the limitations of auto modes to continue on your creative journey.
Using Portraiture, People and Products as our subject matter, you will learn about lighting, composition and how to use aperture, shutter speed and ISO to capture the important things in life.
This course offers a blend of helpful theory in easy-to-understand terms, clear demonstrations and student practicals so you can put the theory into practice.
 
This course will cover:
    Portraiture
    Still life photography
    Creative photography concepts
    Understanding light qualities and exposure
    Lighting types
    Using a flash
    Composition
    Shooting to a design brief
    Defining your style
    Working in photoshop

Entry requirements

It is preferred that participants have completed the unit ICPDMT321 Capture a Digital Images (Digital Photography for Beginners) before enrolling in this course. Otherwise, a good working knowledge of your camera in manual mode is required.

Participants will also require:
    A DSLR or mirrorless camera with the option of manual mode, capable of manually adjusting shutter speed, aperture and ISO controls is essential for this course
    Interchangeable lenses or broad range zoom lens   
    An off camera flash is essential for this course
    Image card(s), USB, camera card reader, charged camera and flash batteries, chargers
    Tripod
    Be familiar with your camera manual prior to starting the course (most manufacturers have online manuals you can download via the web if necessary)
    Knowledge of working with computers
    Pen and notepad
    Course content includes completing assessment criteria

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    CUAPHI302 Capture Photographic Images

MBB06 Printmaking - Stage 1 Skill Set
Skill set Denmark

Description

In this course you will:

  • Develop your basic drawing techniques
  • Do relief printing on lino blocks
  • Practice etching on acetate
  • Use colograph on strawboard
  • Explore  multi layered printing  

 
Certification

On successful completion of this course students will receive a statement of attainment for the following nationally accredited units:
GALTP101A – Learning through practice
CUAPRI201 – develop printmaking skills
CUAACD101 – Use basic drawing techniques.

This course will be offered at these campuses: Denmark

If a campus offering this course is not featured in the menu list below or doesn’t have dates, it means they don’t have dates set right now but they are being planned. You can keep checking this page or use the enquiry form to register your interest.

CUA31115 AZN2 Visual Arts
Certificate III Bunbury
Busselton
Margaret River

This qualification will provide you with the practical skills and knowledge to create two and three dimensional forms in a variety of visual art areas. You will learn to visualise, develop and present ideas and images, to discuss the visual arts analytically and appreciatively and to constructively evaluate your own work and that of others. You will also learn skills in drawing, painting, printmaking, ceramics, textiles, and design.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

CUA51115 AZL3 Visual Arts
Diploma Bunbury
Busselton
Margaret River

This qualification will provide you with developed skills and knowledge across many media, and practice may incorporate ceramics, digital art, glasswork, drawing and illustration, jewellery making, painting, photomedia, printmaking, sculpture, textile design and wood design. You will have a sound grasp of the theory and history to critically analyse and synthesise information from a range of sources. You will further develop skills in arts and crafts, interpret and respond to a design brief and refine art techniques.

This course has additional entry requirements, please enquire for details.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

CUA41315 AZO2 Visual Arts
Certificate IV Bunbury
Busselton
Margaret River
G000000, G000001

The Certificate IV in Visual Arts will further develop your practical skills and knowledge enabling you to create original artworks in a range of areas including painting, printmaking, drawing, sculpture, 2D and 3D design and textile art. Your skills will be developed through direct investigation and experimentation of techniques and materials.  You will learn and apply art terms and incorporate a critical approach to the production and presentation of your artwork. You will undertake research and critical analysis of culture and history to inform your arts practice, as well as focus on your personal development, and professional practice in arts business in preparation for the arts industry.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

CUA10315 AZK5 Visual Arts
Certificate I

This full time course is designed for 15-18 year olds who are not attending school. Students will engage in practical and hands on skills in printmaking, painting, drawing and digital cameras and technology. The course will incorporate elements of language, literacy and numeracy in a creative learning environment.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

CUA20715 AZN4 Visual Arts
Certificate II Collie

This full time course is designed for 15-18 year olds who are not attending school. Students will engage in practical and hands on skills in printmaking, painting, drawing and digital cameras and technology. The course will incorporate elements of language, literacy and numeracy in a creative learning environment.

Study modes and durations differ depending on your local campus. Please check with your local campus for more information.

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

Pages