COVID-19 updates
Home | Sub Study Area | General Construction

General Construction

CERTIFICATE IV IN BUILDING AND CONSTRUCTION (CONTRACT ADMINISTRATION)

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview
Fees and charges
Units
How to apply
Important information
Enquire now
Call us: 1800 621 445
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

This course was available for Semester 2, 2016.
This course is available for Semester 1, 2017.

Clean up clone

Link to photo for PDF:

Photo override if needed:

TAFE title:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Skid Steer Loader

State ID: MAA85

Description

This course trains novice operators in the skills required to enter the industry as a certified skid steer loader operator.
The course covers:
•    Plan and prepare for skid steer loader operations
•    Operate skid steer loader
•    Load, carry and place materials
•    Select, remove and fit attachments
•    Relocate the skid steer loader
•    Carry out machine operator maintenance
•    Conduct housekeeping activities

 

Entrance Requirements

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

LLN requirements:

Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.

Important information

Personal Protective Equipment (PPE):

For the practical assessment you need to be in appropriate work wear and bring suggested items as listed below;

  • long trousers
  • long sleeved shirt
  • steel capped boots
  • Safety glasses
  • Work gloves
  • rain jacket (if required)

 

Participants are encouraged to bring:

•             Pencil case and notebook

•             Water bottle, lunch, snacks

How to apply

For full time, part time, flexible or online courses apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Available Semester 1 & Semester 2, 2020

Albany - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Albany
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates
Katanning - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Katanning
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Front End Loader

State ID: MAA14

Description

This course trains novice operators in the skills required to enter the industry as a certified wheeled front end loader operator.

The course covers:
    Plan and prepare for wheel loader operations    
    Operate the wheel loader    
    Carry out operator maintenance    
    Carry out housekeeping activities

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

    AHCMOM207 Conduct Front-end Loader Operations

Entrance Requirements

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

Participants must be a minimum of 18 years of age on the date of assessment.

LLN requirements:

Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.

Important information

Personal Protective Equipment (PPE):

For the practical assessment you need to be in appropriate work wear and bring suggested items as listed below;

· long trousers

· long sleeved shirt

· steel capped boots

· rain jacket (if required)

 

Participants are encouraged to bring:

• Pencil case and notebook

• Water bottle, lunch, snacks

How to apply

For full time, part time, flexible or online courses apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Available Semester 1 & Semester 2, 2020

Albany - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Albany
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Confined Spaces Skill Set

State ID: MAB54

Description

This course will provide you with the knowledge and skills required to enter and work in confined spaces in the Resources and Infrastructure Industries.

In this course you will learn the requirements for working in confined spaces including:

Entrance Requirements

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

LLN requirements:

Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.

Important information

Personal Protective Equipment (PPE):

For the practical assessment you need to be in appropriate work wear and bring suggested items as listed below;

  • long trousers
  • long sleeved shirt
  • steel capped boots
  • rain jacket (if required)

 

Participants are encouraged to bring:

•             Pencil case and notebook

•             Water bottle, lunch, snacks

How to apply

For full time, part time, flexible or online courses apply at http://tasonline.tafe.wa.edu.au when applications are open.

For international students, contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Available Semester 1 & Semester 2, 2020

Albany - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Albany
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates
Esperance - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Esperance
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates
Katanning - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Katanning
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates
Manjimup - Register your interest

Overview

Fees and charges

Units

Overview
When Available Semester 1 & Semester 2
Where Manjimup
How On Campus
Apply now
Please contact your local campus or complete the enquiry form below including preferred dates

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Side by Side

State ID: MAA23

Description

This short course covers the process for safely checking, loading, starting and operating a side by side utility vehicle.

Participants will learn to steer, manoeuvre, position and stop the vehicle in a smooth and controlled

manner.

 

The course also covers

► Routine checks and maintenance procedures

► hazards and risks associated with side by side utility vehicle areas of operation

► loading and securing side by side utility vehicle safely

Entrance Requirements

Fees and charges

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

LLN – Language literacy and numeracy requirements: Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.
 

Fees and charges

Non concession: $82.90
Concession: $29.20
Commercial / International: $429.85

Important information

Personal Protective Equipment (PPE):

For the practical assessment you need to be in appropriate work wear and bring suggested items as listed below;

  • Helmet
  • long trousers
  • long sleeved shirt
  • steel capped boots
  • rain jacket (if required)

 

Note: A hi-vis vest can be supplied on the day if required.

 

Participants are encouraged to bring:

•             Pencil case and notebook

•             Water bottle, lunch, snacks

How to apply
  1. Please check to see if dates have been set for this course by selecting the campus you wish to attend at the bottom of this page.
  2. Complete the Course enquiry form below and advise which dates you would like to enrol into.
  3. We will then send you enrolment forms to complete.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus

Date: Register your interest
Time: To be advised
Duration: 2 days

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Licence to Perform Dogging

State ID: MAA75

Description

This course will provide you with the knowledge and skills required to perform slinging techniques, including the selection and inspection of lifting gear and directing the crane operator in the movement of a load when the load is out of view of the operator.

The work described in this course relates to the National Standards for licensing persons performing high risk work. On successful completion of this course you will be able to apply for a high-risk licence through Worksafe.

Entrance Requirements

Fees and charges

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

Participants must be a minimum of 18 years of age on the date of assessment.

LLN requirements:

Adequate literacy and numeracy skills to complete the written and practical component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.

Fees and charges

$1340.00

Important information

Please note there are some requirements for this course including PPE.

  • Participants must be a minimum of 18 years of age on the date of assessment.
  • long trousers
  • work shirt (Hi - Vis preferred)
  • steel capped boots

SR TAFE can supply (feel free to bring your own)

  • safety helmet
  • gloves
  • safety glasses

Participants are encouraged to bring:

  • Pencil case and notebook
  • Water bottle, lunch, snacks

 

Lodging a High-Risk Work Licence Application:

On the successful completion of this course, YOU must send the high-risk work licence application form to WorkSafe within 2 months of your assessment.

Failure to send your application to WorkSafe within the 2 months will mean you will need to be reassessed at an additional cost.

This application must include:

Completed ‘WorkSafe WA Application for a Licence to Perform High Risk Work’ form

2 verified copies of identification (primary & secondary)

2 passport sized photos attached to the form

A verified copy of your statement of attainment from SRTAFE

Notice of Assessment given to you by the assessor on successful completion of your assessment and

Payment for licence fee.

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus
Date: Register Your Interest
Time: To be advised
Duration: 4 days

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Licence to Perform Rigging (Basic Level)

State ID: MAA73

Description

This course will provide you with the knowledge and skills required to gain a WorkSafe Licence to Perform High Risk Work in Basic Rigging.
Anyone who wishes to obtain a riggers high risk licence from WorkSafe WA is required to complete this training.

The course covers:
    movement of plant and equipment
    steel erection
    placement of pre-cast concrete
    safety nets and static lines
    perimeter safety screens and shutters
    cantilevered crane loading platforms

Entrance Requirements

Fees and charges

How to apply

Entrance Requirements

Participants must hold hold a Dogman's National High Risk Work Licence (Class DG) or a valid certificate of competency

This course has basic equipment and/or PPE requirements

Minimum age of 18 years

Fees and charges

Non-Concession: $1370
Concession: $ to be advised
Commercial / International: $ to be advised

School age students
Students who would normally be attending year 12 or below in the current calendar year will be eligible to enrol at the commercial / international rate for this course.

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses
Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus
Date: Register Your Interest
Time: To be advised
Duration: 5 days

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Licence to Erect, Alter and Dismantle Scaffolding (Basic Level)

State ID: MAA74

Description

This course will provide you with the knowledge and skills required to gain a WorkSafe License to Perform High Risk Work in Basic Scaffolding Operations.
Anyone who wishes to obtain this license is required to complete this training.

The course covers:
    planning out your work
    selecting and inspecting equipment
    setting up for the task
    erecting and dismantling scaffolding

Entrance Requirements

Fees and charges

How to apply

Entrance Requirements

This course has basic equipment and/or PPE requirements

Minimum age of 18 years

Fees and charges

Non-Concession: $1390
Concession: $ to be advised
Commercial / International: $ to be advised

School age students
Students who would normally be attending year 12 or below in the current calendar year will be eligible to enrol at the commercial / international rate for this course.

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses
Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus
Date: Register Your Interest
Time: To be advised
Duration: 5 days

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Forklift Refresher

State ID: MAA82-R

Description

Experienced forklift operators are invited to participate in a 1 day assessment only Forklift Refresher course.
Before the assessment day, participants will be issued with the following information to assist you in the assessment process:
    Course manual & DVD
    Activity book (must be completed before attempting the written assessment)

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units:

Entrance Requirements

Fees and charges

Important information

How to apply

Entrance Requirements

This is a one day assessment. If the Trainer/Assessor believes you are not sufficiently experienced, you will not be assessed and will need to enrol in the next full training course available.

This course has basic equipment and/or PPE requirements (located under Important information)

Participants must be a minimum of 18 years of age on the date of assessment.

All students must bring to class 2 forms of ID:

  • One form must have photo ID (ie Driver’s licence, Passport, Over 18 card)
  • The other form can be a Medicare Card, any Utility Bill, etc. (that has your full name)

You must have sound literacy and numeracy skills

(If you have language, numeracy or literacy concerns please discuss them with us PRIOR to the course commencing)

Fees and charges

Non-Concession: $ to be advised
Concession: $ to be advised
Commercial / International: $ to be advised

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses

Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

Important information

What to wear (PPE)

Participants are required to wear appropriate work wear:

  • long pants
  • steel capped boots
  • no singlets

Lodging a High Risk Work Licence Application:

On the successful completion of this course, YOU must send the high risk work licence application form to WorkSafe within 2 months of your assessment.

Failure to send your application to WorkSafe within the 2 months will mean you will need to be reassessed at an additional cost.

This application must include:

Completed ‘WorkSafe WA Application for a Licence to Perform High Risk Work’ form

2 verified copies of identification (primary & secondary)

2 passport sized photos attached to the form

A verified copy of your statement of attainment from SRTAFE

Notice of Assessment given to you by the assessor on successful completion of your assessment and

Payment for licence fee.

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus
Date: Register your interest
Time: To be advised
Duration: 1 day
Bunbury Campus
Date: Register your interest
Time: To be advised
Duration: To be advised
Esperance Campus
Date: Register your interest
Time: To be advised
Duration: 1 day
Katanning Campus
Date: Register your interest
Time: To be advised
Duration: 1 day

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Excavator

State ID: MAA13

Description

This course trains novice operators in the skills required to enter the industry as a certified excavator operator.
The course covers:
•    Plan and prepare for hydraulic excavator operations
•    Operate hydraulic excavator
•    Carry out operator maintenance
•    Carry out housekeeping activities

Certification

On successful completion of this course, students will receive a statement of attainment for the following nationally accredited units.

 RIIMPO301E Conduct Excavator Operations

Entrance Requirements

Fees and charges

Important information

How to apply

Entrance Requirements

This course has basic PPE requirements (located under Important information)

LLN requirements:

Adequate literacy and numeracy skills to complete the written component of the assessment. If you have language, numeracy or literacy concerns, please discuss them with us before the course starts.

Fees and charges

Non-Concession: $142.20
Concession: $73.80

School age students
Students who would normally be attending year 12 or below in the current calendar year will be eligible to enrol at the commercial / international rate for this course.

International students
This courses isn’t available to Visa 500 International Students.
For information on international courses, please follow this link to the TAFE International WA website
www.tafeinternational.wa.edu.au/courses
Other visa holder students
All other visa holders (i.e 457, 300, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

Important information

Personal Protective Equipment (PPE):

For the practical assessment you need to be in appropriate work wear and are encouraged to bring suggested items as listed below;

  • long trousers
  • long sleeved shirt
  • steel capped boots
  • Safety glasses
  • Work gloves
  • rain jacket (if required)

 

Participants are encouraged to bring:

•             Pencil case and notebook

•             Water bottle, lunch, snacks

How to apply

Please complete the Course enquiry form below to receive enrolment information.

Delivery location, important dates and study options

In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.

While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.

The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.

South Regional TAFE will provide students with adequate support to work in online environments where necessary.

Albany Campus
Date: Register Your Interest
Time: To be advised
Duration: 2 Days

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages