Home | Student Portal | Wi-Fi Connect

Wi-Fi Connect

Wireless internet access is available on-campus by connecting to the SRTAFE Wi‑Fi network using your SRTAFE username and password.

Follow the steps below to connect your device to the SRTAFE Wi-Fi:

  1. Navigate to Apps
  2. Locate and tap Settings
  3. Tap Wi-Fi
  4. Tap SRTAFE
  5. Ensure that EAP method is set to PEAP
  6. Ensure that Phase 2 authentication is None
  7. Ensure that the CA certificate is Don't Validate
  8. Enter your username in the Identity field
  9. Enter your password in the Password field
  10. Tap Connect
  1. Tap Settings
  2. Tap Wi-Fi
  3. Tap SRTAFE
  4. Enter your username and password
  5. Tap Join
  6. Tap Trust
  1. Click the Wireless Network icon in the system tray
  2. Click SRTAFE
  3. Enter your username and password and click OK
  4. Click Connect

Please note: Some Windows 10 devices will only connect once the Windows 10 Configurator for the following networks is downloaded and installed to your computer:

  1. Navigate to the top-right corner of your screen to display the Windows sidebar and click Settings
  2. Click the Wireless Network icon
  3. Click SRTAFE
  4. Enter your username and password and click OK
  5. Click Connect
  1. Download and run the Windows 7 Configurator
  2. Click SRTAFE
  3. Enter your username and password and press OK
  4. Click Connect

For connections to the GUEST wireless network, download and run the alternate Windows 7 Configurator.

  1. Click on Wi-Fi icon on top right side on the menu bar and turn on Wi-Fi
  2. Click on SRTAFE
  3. Enter your username and password
  4. Press Join
  5. Click on Continue to accept the Wi-Fi certificate
  6. Enter your device's password and click Update Settings to save the Wi-Fi certificate
Page last updated May 08, 2019