,
Home | Courses | CERTIFICATE III IN PLUMBING

CERTIFICATE III IN PLUMBING

National ID: CPC32413 | State ID: J787

 

Does your career pipe dream involve real pipes?

When you complete the Certificate III in Plumbing you’ll be looking at an in demand career as a plumber, or gasfitter.
You will gain the knowledge and skills to work effectively in the construction industry, how to safely install, alter and repair pipe work services and appliances to suit domestic, commercial and industrial needs, cold and hot water supply, gas supply, sewage, waste and rainwater disposal, how to install and repair roofing, gutters and drain pipes, how to make buildings waterproof, and workplace health and safety.
The Certificate III in Plumbing is an apprenticeship; you must be employed in a training contract by an appropriate organisation to study.

Not all study modes are offered at all campuses.  Please check with your local campus for study modes and elective units offered.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

This qualification is designed to provide you with a range of practical skills, technical training and communication skills for a career in plumbing;
•    Plumber
•    Plumber and drainer
•    Plumber and gasfitter
•    Gasfitter
•    Roof plumber
For information about jobs and pathways, please see
http://joboutlook.gov.au/

Further study opportunities:

•    Certificate IV in Plumbing and Services

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Albany
Bunbury
Duration

Albany Campus
Apprenticeship
This course is available for Semester 1

Bunbury Campus
Apprenticeship
This course is available for Semester 1
This course is available for Semester 2

HowApprenticeship
When
Fees and charges

Please contact the college to receive an indicative price for this course.

Please contact the college to receive an indicative price for this course.

Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.

VET Student Loans
The Certificate III in Plumbing qualification isn’t currently eligible under the Commonwealth Government's VET Student Loan scheme.

For more information on the eligible courses please see www.education.gov.au/vet-student-loans
For information on VET Student Loans at South Regional TAFE
http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans

International students
This courses isn’t available to Visa 500 International Students.

For information on courses available to international students at SRTAFE, please follow this link to the TAFE International WA website

Other visa holder students

All other visa holders (i.e 300, 416, 417, 457, 461, 485, 489, 496) contact either South West or Great Southern Campuses to confirm your eligibility;
South West Campuses    studentservices@srtafe.wa.edu.au    0417 937 894
Great Southern Campuses    studentsupport@srtafe.wa.edu.au    1800 675 781

Units

Phase 1
Unit Title National ID Unit of Study
Apply OHS requirements, policies and procedures in the construction industryCPCCOHS2001AW9435
Basic Combustion, Flueing and Exhaust PrinciplesM1193
Carry out interactive workplace communicationCPCPCM2039AWE999
Carry out simple concreting and renderingCPCPCM2054AWF842
Carry out WHS requirementsCPCPCM2043AWF833
Cut and join sheet metalCPCPCM2048AWF837
Gas SafetyM1192
Gas Standards Legislation (Consumer Installations)waM1191
Mark out materialsCPCPCM2050AWF839
Use plumbing hand and power toolsCPCPCM2046AWF835
Weld using oxy-acetylene equipmentCPCPCM2052AWF840
Work effectively in the plumbing and services sectorCPCPCM2041AWF832
Phase 2
Unit Title National ID Unit of Study
Handle and store plumbing materialsCPCPCM2045AWF834
Install and fit off sanitary fixturesCPCPSN3024AWF960
Install discharge pipesCPCPSN3022AWF958
Install stormwater and sub-soil drainage systemsCPCPDR2024AWF859
Provide basic emergency life supportHLTFA211AWD144
Read plans and calculate plumbing quantitiesCPCPCM2040AWF831
Set out and install water servicesCPCPWT3021AWF965
Weld polyethylene and polypropylene pipes using fusion methodCPCPCM3022AWF845
Phase 3
Unit Title National ID Unit of Study
Carry out levellingCPCPCM2047AWF836
Fabricate and install non-ferrous pressure pipingCPCPCM3023AWF846
Fit off and commission heated and cold water servicesCPCPWT3026AWF970
Install and adjust water service controls and devicesCPCPWT3022AWF966
Install and commission water heating systemsCPCPWT3023AWF967
Install below ground sanitary drainage systemsCPCPDR3022AWF863
Install domestic treatment plantsCPCPDR2022AWF857
Install on-site disposal systemsCPCPDR3023AWF864
Install prefabricated inspection openings and enclosuresCPCPDR2026AWF861
Install trench supportRIICCM210DWH086
Locate and clear blockagesCPCPDR2021AWF856
Phase 4
Unit Title National ID Unit of Study
Fabricate and install roof drainage componentsCPCPRF3022AWF951
Flash penetrations through roofs and wallsCPCPCM3021AWF844
Install gas piping systemsCPCPGS3056AWF902
Install gas pressure control equipmentCPCPGS3048AWF894
Install gas sub-metersCPCPGS3055AWF901
Purge consumer pipingCPCPGS3051AWF897
Work safely at heightsCPCCCM2010BWE987
Work safely on roofsCPCPCM2055AWF843
Phase 5
Unit Title National ID Unit of Study
Calculate and install natural ventilation for Type A gas appliancesCPCPGS3054AWF900
Connect and install storage tanks to a domestic water supplyCPCPWT3020AWF964
Connect irrigation systems from drinking water supplyCPCPWT3027AWF971
Cut using oxy-LPG-acetylene equipmentCPCPCM2049AWF838
Drain work siteCPCPDR2025AWF860
Install and commission Type A gas appliancesCPCPGS3061AWI774
Install LPG storage of aggregate storage capacity up to 500 litresCPCPGS3059AWF905
Install LPG systems in caravans, mobile homes and mobile workplacesCPCPGS3046AWF892
Install LPG systems in marine craftCPCPGS3047AWF893
Install Type A gas appliance fluesCPCPGS3049AWF895
Install water pumpsetsCPCPWT3025AWF969
Size consumer gas piping systemsCPCPGS3057AWF903
Weld using manual metal arc welding equipmentCPCPCM2053AWF841
Phase 6
Unit Title National ID Unit of Study
Design and size consumer gas installationsCPCPGS4011CWI775
Disconnect and reconnect Type A gas appliancesCPCPGS3053AWF896
Fabricate and install fire hydrant and hose reel systemsCPCPFS3031AWF871
Fabricate and install sanitary stacksCPCPSN3023AWF959
Install pre-treatment facilitiesCPCPSN3025AWF961
Plan layout of a residential sanitary drainage systemCPCPDR3021AWF862
Plan layout of a residential sanitary plumbing systemCPCPSN3011BWF957
How to apply
Important information
Enquire now
Call us: 1800 621 445
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Please note that all delivery modes may not be available at all campuses; please check with individual campuses on modes of study.

This course is only available as an apprenticeship; you must be employed in a training contract by an appropriate Employer to study.

For all other enquiries please contact South Regional TAFE on 1800 621 445 or email us at enquiry@srtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

Please note that all delivery modes may not be available at all campuses; please check with individual campuses on modes of study.

This course is only available as an apprenticeship; you must be employed in a training contract by an appropriate Employer to study.

For all other enquiries please contact South Regional TAFE on 1800 621 445 or email us at enquiry@srtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

Qualification level

0
This course was available for Semester 2, 2016.
0
This course is available for Semester 1, 2017.

Clean up clone

Link to photo for PDF:

Photo override if needed:

TAFE title:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Page last updated December 13, 2019