Certificate II in Engineering
National ID: MEM20105 | State ID: W233
This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and math. Trainees will learn and practice their skills on the job, in the workplace.
Study modes and durations differ depending on your local campus. Please check with your local campus for more information.
Entrance Requirements
Job opportunities
Study pathway
How to apply
Entrance Requirements
| School Leaver |
Non-School Leaver |
AQF |
| OLNA or NAPLAN 9 Band 8 |
C Grades in Year 10 English and Maths or equivalent |
Certificate I or Certificate II |
Job opportunities
The aim of this traineeship qualification is to provide learners with industry specific training and workplace learning to gain skills, knowledge and behaviours to enable transition into an indentured apprenticeship. Successful completion of this qualification provides you with the opportunity to become a trades assistant.
Study pathway
Certificate III in Engineering (NB. You will need to be employed and registered as an apprentice/trainee before you can further your studies in the Engineering industry).
How to apply
Part time, flexible or online courses have rolling enrolments. For help enrolling or for more information contact your local campus.
Please note that all delivery modes may not be available at all campuses, please check with individual campuses on modes of study.
For full time courses, apply at http://tasonline.tafe.wa.edu.au when applications are open.
For international students, contact www.tafeinternational.wa.edu.au.
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.
For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au.
Delivery location, important dates and study options
Available Semester 1 & Semester 2
Bunbury - Traineeship
Overview
Fees and charges
Units
Overview
| When |
Available Semester 1 & Semester 2 |
| Where |
Bunbury |
| How |
Traineeship
|
Fees and charges
Please contact the college to receive an indicative price for this course.
South Regional TAFE's indicative fees for 2019 are available at the link:
www.southregionaltafe.wa.edu.au/futurestudents/feespaymentoptions
These fees are indicative for local students enrolling full-time in government funded courses in 2017. Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.
VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )
For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans
International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses
Units
Not all units and study modes are offered at all campuses. Please check with your local campus.
Core
| National ID |
Unit Title |
| MEM13014A |
Apply principles of occupational health and safety in the work environment |
| MEM14004A |
Plan to undertake a routine task |
| MEM15002A |
Apply quality systems |
| MEM15024A |
Apply quality procedures |
| MEM16007A |
Work with others in a manufacturing, engineering or related environment |
Elective
| National ID |
Unit Title |
| MEM03001B |
Perform manual production assembly |
| MEM05004C |
Perform routine oxy acetylene welding |
| MEM05005B |
Carry out mechanical cutting |
| MEM05007C |
Perform manual heating and thermal cutting |
| MEM05012C |
Perform routine manual metal arc welding |
| MEM05050B |
Perform routine gas metal arc welding |
| MEM07032B |
Use workshop machines for basic operations |
| MEM09002B |
Interpret technical drawing |
| MEM11011B |
Undertake manual handling |
| MEM12001B |
Use comparison and basic measuring devices |
| MEM12023A |
Perform engineering measurements |
| MEM12024A |
Perform computations |
| MEM16006A |
Organise and communicate information |
| MEM16008A |
Interact with computing technology |
| MEM18001C |
Use hand tools |
| MEM18002B |
Use power tools/hand held operations |
| MEM18055B |
Dismantle, replace and assemble engineering components |
| MSMENV272 |
Participate in environmentally sustainable work practices |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Available Semester 1 & Semester 2
Bunbury - Traineeship
Overview
Fees and charges
Units
Overview
| When |
Available Semester 1 & Semester 2 |
| Where |
Bunbury |
| How |
Traineeship
|
Fees and charges
Please contact the college to receive an indicative price for this course.
South Regional TAFE's indicative fees for 2019 are available at the link:
www.southregionaltafe.wa.edu.au/futurestudents/feespaymentoptions
These fees are indicative for local students enrolling full-time in government funded courses in 2017. Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.
VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )
For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans
International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses
Units
Not all units and study modes are offered at all campuses. Please check with your local campus.
Core
| National ID |
Unit Title |
| MEM13014A |
Apply principles of occupational health and safety in the work environment |
| MEM14004A |
Plan to undertake a routine task |
| MEM15002A |
Apply quality systems |
| MEM15024A |
Apply quality procedures |
| MEM16007A |
Work with others in a manufacturing, engineering or related environment |
Elective
| National ID |
Unit Title |
| MEM03001B |
Perform manual production assembly |
| MEM05004C |
Perform routine oxy acetylene welding |
| MEM05005B |
Carry out mechanical cutting |
| MEM05007C |
Perform manual heating and thermal cutting |
| MEM05012C |
Perform routine manual metal arc welding |
| MEM05050B |
Perform routine gas metal arc welding |
| MEM07032B |
Use workshop machines for basic operations |
| MEM09002B |
Interpret technical drawing |
| MEM11011B |
Undertake manual handling |
| MEM12001B |
Use comparison and basic measuring devices |
| MEM12023A |
Perform engineering measurements |
| MEM12024A |
Perform computations |
| MEM16006A |
Organise and communicate information |
| MEM16008A |
Interact with computing technology |
| MEM18001C |
Use hand tools |
| MEM18002B |
Use power tools/hand held operations |
| MEM18055B |
Dismantle, replace and assemble engineering components |
| MSMENV272 |
Participate in environmentally sustainable work practices |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Engineering and Mining
Page last updated October 11, 2019
, 