Certificate II in Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)
National ID: UEE22011 | State ID: AA41
This entry level qualification will provide you with the practical skills and knowledge to work safely in an electrotechnology environment, solve problems in multiple d.c. circuits and extra low voltage single path circuits. You will learn skills that will enable you to identify the required components/materials and use routine equipment, plant or technology relevant to the electrotechnology industry.
This course is Competitive at selected campuses and further Entrance Requirements may apply.
Study modes and durations differ depending on your local campus. Please check with your local campus for more information.
Entrance Requirements
Job opportunities
Study pathway
How to apply
Entrance Requirements
| School Leaver |
Non-School Leaver |
AQF |
| OLNA or NAPLAN 9 Band 8 |
C Grades in Year 10 English and Maths or equivalent |
Certificate I or Certificate II |
Job opportunities
The aim of this pre-apprenticeship is to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into an indentured apprenticeship.
Study pathway
Certificate III in Electrotechnology (NB. You will need to be employed and registered as an apprentice/trainee before you can further your studies in the Electrotechnology industry).
Delivery location, important dates and study options
In order to comply with COVID-19 Government directed social distancing guidelines, some courses may include a mix of online and classroom based training delivery, as well as practical and work experience placements.
While the mode of delivery might vary, the content and key learning outcomes of the course will remain the same.
The precise mix of delivery method will vary from course to course. The time, place and method of delivery may also vary across the semester to ensure social distancing and safe training delivery for staff and students during the COVID-19 pandemic.
South Regional TAFE will provide students with adequate support to work in online environments where necessary.
Semester 1
Albany - Full Time
Overview
Fees and charges
Units
Overview
| Duration |
2 semester/s |
| When |
Semester 1 |
| Where |
Albany |
| How |
Full-Time
|
Fees and charges
Indicative fees and charges 2020 [click here]. These are estimated 2020 tuition and resources fees for the average course.
Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.
VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )
For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans
International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses
Units
Not all units and study modes are offered at all campuses. Please check with your local campus.
Core
| National ID |
Unit Title |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Bunbury - Full time
Overview
Fees and charges
Units
Overview
| Duration |
6 months |
| When |
Semester 1 |
| Where |
Bunbury |
| How |
Full-Time
|
Fees and charges
Indicative fees and charges 2020 [click here]. These are estimated 2020 tuition and resources fees for the average course.
Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.
VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )
For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans
International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses
Units
Not all units and study modes are offered at all campuses. Please check with your local campus.
Core
| National ID |
Unit Title |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
| CPCCOHS1001A |
Work safely in the construction industry |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Semester 2
Bunbury - Full time
Overview
Fees and charges
Units
Overview
| Duration |
6 months |
| When |
Semester 2 |
| Where |
Bunbury |
| How |
Full-Time
|
Fees and charges
Indicative fees and charges 2020 [click here]. These are estimated 2020 tuition and resources fees for the average course.
Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.
VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )
For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans
International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses
Units
Not all units and study modes are offered at all campuses. Please check with your local campus.
Core
| National ID |
Unit Title |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
| CPCCOHS1001A |
Work safely in the construction industry |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Building and Construction
Page last updated November 30, 2020
, 