Home | Courses | Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH)

Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH)

National ID: MEM30305 | State ID: WT77

 

This qualification will provide you with trade level practical skills and knowledge in fabrication and welding, using industry standard technologies and techniques. You will learn skills in using tools, measuring and calculating, technical drawing, load shifting, thermal cutting, using forging and casting equipment, and advanced welding to trade standard. (NB. You will need to be employed and registered as an apprentice/trainee before you can undertake this course). This course may also be available through Recognition of Prior Learning to eligible applicants.

Not all study modes are offered at all campuses. Please check with your local campus for study modes and elective units offered.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

This qualification reflects the role of individuals who perform a broad range of fabrication and welding tasks in the engineering industry.

Further study opportunities:

Students successful in this qualfication, may seek further certification against AS1796 (CODED Welding; available at SR TAFE as a short course). CODED welding can then be used toward:

• pathway to completing Cert IV in Engineering

• WTIA (Welding Technology Institute of Australia) certification

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Albany
Bunbury
Duration

Albany Campus
Apprenticeship
This course is available for Semester 1
This course is available for Semester 2

Bunbury Campus
Apprenticeship
This course is available for Semester 1
This course is available for Semester 2

HowApprenticeship
When
Fees and charges

Please contact the college to receive an indicative price for this course.

South Regional TAFE's indicative fees for 2017 are available at the link:
www.southregionaltafe.wa.edu.au/futurestudents/feespaymentoptions
These fees are indicative for local students enrolling full-time in government funded courses in 2017. Your fees will be calculated from your individual circumstances at the time of enrolment.
Concessions (for eligible courses at certificate levels I to IV) and annual course fee caps may apply. Other charges may apply.

VET Student Loan
Students in Diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. Only an Australian citizen, a permanent humanitarian visa holder and resident in Australia, or a New Zealand Special Visa 444 student who can also provide evidence of a WACE Certificate (completion of Year 12) or equivalent can apply for a loan. For more information please see http://studyassist.gov.au/sites/StudyAssist/ (Opens in a new window )

For information on the VET Student Loan process at South Regional TAFE please see http://www.southregionaltafe.wa.edu.au/futurestudents/vet-student-loans

International students
Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.
International students can only study full-time. For information on international student fees and application, please follow this link to the TAFE International WA website www.tafeinternational.wa.edu.au/courses

 

Units

Phase 1
Unit Title National ID Unit of Study
Apply principles of occupational health and safety in the work environmentMEM13014AW5502
Interpret technical drawingMEM09002BW5418
Mark off/out (general engineering)MEM12006CWA993
Perform engineering measurementsMEM12023AW5492
Plan to undertake a routine taskMEM14004AW5512
Use hand toolsMEM18001CW5563
Work with others in a manufacturing, engineering or related environmentMEM16007AW5548
Phase 2
Unit Title National ID Unit of Study
Apply quality systemsMEM15002AW5532
Perform advanced manual thermal cutting, gouging and shapingMEM05008CW5334
Perform computationsMEM12024AW5449
Perform manual heating and thermal cuttingMEM05007CW5333
Perform routine gas metal arc weldingMEM05050BW5326
Perform routine gas tungsten arc weldingMEM05049BW5324
Perform routine manual metal arc weldingMEM05012CW5294
Use power tools/hand held operationsMEM18002BW5574
Phase 3
Unit Title National ID Unit of Study
Carry out mechanical cuttingMEM05005BW5331
Interact with computing technologyMEM16008AW5452
Mark off/out structural fabrications and shapesMEM12007DWA651
Organise and communicate informationMEM16006AW5451
Participate in environmentally sustainable work practicesMSAENV272BD3655
Plan a complete activityMEM14005AW5513
Phase 4
Unit Title National ID Unit of Study
Apply fabrication, forming and shaping techniquesMEM05010CWA640
Apply quality proceduresMEM15024AW5531
Assist in the provision of on the job trainingMEM17003AW5552
Perform geometric developmentMEM05037CWA646
Phase 5
Unit Title National ID Unit of Study
Apply safe welding practicesMEM05052AW5328
Monitor quality of production welding/fabricationsMEM05014CW5296
Select welding processesMEM05051AW5327
Weld using gas metal arc welding processMEM05017DWA643
Weld using manual metal arc welding processMEM05015DWA642
Phase 6
Unit Title National ID Unit of Study
Assemble fabricated componentsMEM05011DWA641
Weld using flux core arc welding processMEM05047BW5322
Weld using gas tungsten arc welding processMEM05019DWA644
How to apply
Important information
Enquire now
Call us
Email us

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Part time, flexible or online courses have rolling enrolments. For help enrolling or for more information contact your local campus.
Please note that all delivery modes may not be available at all campuses, please check with individual campuses on modes of study.

For full time courses, apply at http://tasonline.tafe.wa.edu.au when applications are open.
For international students, contact www.tafeinternational.wa.edu.au  
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.
For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au  

Part time, flexible or online courses have rolling enrolments. For help enrolling or for more information contact your local campus.
Please note that all delivery modes may not be available at all campuses, please check with individual campuses on modes of study.

For full time courses, apply at http://tasonline.tafe.wa.edu.au when applications are open.
For international students, contact www.tafeinternational.wa.edu.au  
For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.
For all other enquiries please call us on 1800 621 445 or email enquiry@srtafe.wa.edu.au  

Links

Page last updated November 24, 2017